Wireless Configuration

Wireless Configuration Considerations

Things To Consider In Wireless Configuration!

The use of the internet has become widespread nowadays. Previously, when a modem was used to connect to the internet and a single computer could be connected with a modem. However, with technological advancements, routers have been introduced through which multiple computers can be connected to the internet, all at one time. Signals are routed back and forth with the help of a router. This can be connected to the computer with a wire, which is called an Ethernet cable. Nevertheless, today wireless routers are also used, which do not have to be connected to the computer or laptop. Using these routers is quite easy. The only problem is the  configuration of the router.

Wireless configuration or setting is essential for using the router without any problem or hindrance. Initially, manual configuration had to be performed, but now, as soon as the router is connected, the configuration wizard opens up automatically. Regardless, there are situations when the configuration settings do not open up. This can be due to several reasons, which are as follows:

  • Physical Connections: Typically, for configuring the wireless setting of a router, it has to be connected to the computer via an Ethernet cable. If the wizard doesn’t show up, then the cable isn’t connected properly or isn’t secured. In addition, the cable might not be plugged into the proper port, which is why configuration might be a problem.
  • Default IP: The default IP of a router has to be entered into the web browser in order to get access to the configuration utility. It will not open if even one number is incorrect in the IP address. This IP is given in the router’s documentation or will be printed in the router itself. One has to verify that the address is accurate.
  • Ethernet Cables: The configuration wizard of a router might not show up because the Ethernet cable is malfunctioning or the port is not in the right condition. The back of the router has several ports and the cable can be plugged into each of them to check if it’s working. Next, try out a different Ethernet cable to see if it works. With the right cable and port, the configuration settings will open automatically.
  • Computer: Although this happens very rarely, the Ethernet port of your computer might not be working. In this case, plug the router into another computer to verify the problem. This can help in identifying if it’s the router or the computer that isn’t working. If the router is failing, then the router manufacturer should be contacted to get the problem diagnosed.

This configuration has to be done only the first time and then people can use it easily without having to connect it every time. Wireless configuration is an easy task and people can do it on their own, without the help of any expert. Some routers can be configured automatically and people only have to set the password. This can aid in keeping their network secure and signals cannot be lost.